You are viewing: Exterior Door Hardware

Hatch Key Locks
product
Enlarge Photo		   Description:
Matches most OEM applications. Metal locks, keyed to the C751 style key for replacement in B&B Molders hatches. Press in lock uses two built-in, spring-loaded clips to hold it in place. Designed with an automotive style cylinder, which includes a spring-loaded key closure to keep dirt and moisture out of the key hole. Hole must be at least 3/4" I.D. and no larger than 7/8" I.D. Blades are 5/8" in width, permanently attached to the locks, and need 5/8" from the outside mounting surface to the blade. 		  Part Number:
00100 - 751 Key Code Lock, 1-/18" Long Cam with Key, pkg.
00E00 - 751 Key Code Lock, 5/8" Short Cam with Key, pkg.

Dimensions:
00100 - 1-1/8" from center of mounting hole to end of blade
00E00 - 5/8" from center of mounting hole to end of blade

Compartment Door Thumb Lock
product
Enlarge Photo		   Description:
Deluxe thumb turn compartment lock is built to automotive standards. Includes both straight and offset cam blades making them a universal fit.		   Part Number:
00115 - 5/8" Thumb Lock, pkg.
00125 - 7/8" Thumb Lock, pkg.
00135 - 1-1/8" Thumb Lock, pkg.
00145 - 1-3/8" Thumb Lock, pkg.

Compartment Door Push Latch - Non-Locking
product
Enlarge Photo		   Description:
Push-to-open compartment latch includes a pull tab for easier door opening. Constructed of glass-reinforced nylon for exceptional durability.		   Part Number:
00265 - Non-Locking Latch, pkg.

Compartment Door Push Latch - Locking
product
Enlarge Photo		   Description:
Push-to-open compartment latch includes a pull tab for easier door opening. Constructed of glass-reinforced nylon for exceptional durability.		   Part Number:
00255 - Locking Latch, pkg.

Compartment Door Key Lock
product
Enlarge Photo		   Description:
Deluxe locks are built to automotive standards with a double-sided key for security. A dust cover is built into the lock to keep it clean. Includes straight and offset cam blades making them universal in fit.		   Part Number:
00155 - 5/8" Keyed Lock, pkg.
00165 - 7/8" Keyed Lock, pkg.
00175 - 1-1/8" Keyed Lock, pkg.
00185 - 1-3/8" Keyed Lock, pkg.

Hatch Thumb Lock
product
Enlarge Photo		   Description:
Plastic replacement thumb lock used in various hatches made by B&B Molders. The hole for this lock can be no larger than 7/8" I.D. and at least 3/4" I.D. Press in lock, which uses built-in spring-loaded tabs to hold the lock in place. The blade is 3/4" wide by 1-1/2" long and is non-removable.		   Part Number:
433PW-A - Thumb Lock, Polar White, pkg.

Compartment Door Finger Pull
product
Enlarge Photo		   Description:
Rugged stainless steel for long-lasting durability. Designed as a universal fit and will make operating your compartment doors easier.		   Part Number:
00195 - Metal Finger Pull, pkg.

Replacement Deco Key
product
Enlarge Photo		   Description:
DECO replacement key for many popular cam locks including those on your OEM hatches and access doors.		   Part Number:
DECO - Replacement Deco Key, 2/bulk
DECO-A - Replacement Deco Key, 2/pkg.

Replacement Hurd Key
product
Enlarge Photo		   Description:
Hurd replacement key for many popular cam locks including those on your OEM hatches and access doors.		   Part Number:
751 - Replacement Hurd Key, bulk
751-A - Replacement Hurd Key, 2/pkg.

Compartment Door Trigger Latch - End Mount
product
Enlarge Photo		   Description:
High quality steel provides both security and durability. Replacement for any latch of the same configuration and basic size. Most commonly connected to a center mount operator assembly, using specially designed rods or with universal adjustable cables.		   Part Number:
10935 - 2" Compartment Door Trigger Latch, Black, pkg.
10945 - 3" Compartment Door Trigger Latch, Black, pkg.

Dimensions:
Mounting Holes:
10935 - 2" on center
10945 - 3" on center

Compartment Door Trigger Latch - Flush Mount
product
Enlarge Photo		   Description:
High quality steel provides both security and durability. Replacement for any latch of the same configuration and basic size. Most commonly connected to a center mount operator assembly, using specially designed rods or with universal adjustable cables.		   Part Number:
11705 - Flush Mount Trigger Latch, Black, pkg.

Dimensions:
Mounting Hole: 1.343" x 1.87"

Compartment Door Trigger Latch - Offset Mount
product
Enlarge Photo		   Description:
High quality steel provides both security and durability. Replacement for any latch of the same configuration and basic size. Most commonly connected to a center mount operator assembly, using specially designed rods or with universal adjustable cables.		   Part Number:
11715 - Offset Mount Trigger Latch, pkg.

Dimensions:
Mounting Hole: 3” on center

Compartment Door Trigger Latch Cable Assembly
product
Enlarge Photo		   Description:
Used on any latch assembly. High quality stainless steel construction and zinc plated, hinged pivot end assemblies make these cables a perfect replacement. Universal replacement with one open end that can be cut to any desired length and secured using our Trigger Latch Cable Adjuster, Part #10975.		   Part Number:
10955 - 36" Compartment Door Trigger Latch Cable Assembly, pkg.
10965 - 60" Compartment Door Trigger Latch Cable Assembly, pkg.

Trigger Latch Cable Adjuster
product
Enlarge Photo		   Description:
Used to secure any standard cable. Simply run the cable through the lug and tighten allen screw, then trim any excess cable. Test unit operation before cutting cable to verify proper adjustment of the latch cables.		   Part Number:
10975 - Trigger Latch Cable Adjuster, pkg.

Refrigerator Vent Latch - Thin Panel
product
Enlarge Photo		   Description:
Twist lock latch most often used in refrigerator exterior doors but can also be used for many interior converter doors. Used for thin panel walls with a thickness up to .057”.		   Part Number:
00235 - Vent Latch for Thin Panel Walls, 2/pkg.

Refrigerator Vent Latch - Thick Panel
product
Enlarge Photo		   Description:
Twist lock latch most often used in refrigerator exterior doors but can also be used for many interior converter doors. Used for thin panel walls with a thickness up to .162”.		   Part Number:
00245 - Vent Latch for Thick Panel Walls, 2/pkg.

Water Heater Door Latch
product
Enlarge Photo		   Description:
Universal replacement; will fit all popular water heater applications.		   Part Number:
00225 - Water Heater Door Latch, pkg.

Baggage Door Catch
product
Enlarge Photo		   Description:
Original replacement baggage door catches. Can be mounted above or beside doors. Easily mounts to any exterior to hold open baggage doors while loading and unloading. Specially designed spring-loaded clip holds doors securely and lays flat when not in use. Stylish look adds to your RV‘s appearance.		   Part Number:
10224 - Baggage Door Catch, Black, 2/pkg.
10234 - Baggage Door Catch, White, 2/pkg.
10244 - Baggage Door Catch, Gray, 2/pkg.
10254 - Baggage Door Catch, Colonial White, 2/pkg.
10245 - Baggage Door Catch, Stainless Steel, 2/pkg.

Lighted Plastic Entry Door Assist Handle
product
Enlarge Photo		   Description:
Constructed of durable non-fading plastic; maintains its color and flexibility. Amber light adds extra security and convenience of seeing easier at night. 		  Part Number:
288-CPW-A - Assist Handle Only, Polar White, pkg.
288-CPW-105-A - Assist Handle w/Light, Polar White, pkg.
283-86-GAM - Amber Lens for Assist Handle, bulk
10500 LIGHT - 0.040 Amp light bulb

Dimensions:
Mounting Holes: 10-3/8" on center

Powder Coated Steel Assist Handle
product
Enlarge Photo		   Description:
High quality; works great for exterior or interior entry doors. Can also be used for other applications such as compartment doors, tool boxes, or anywhere a secure, strong handle is needed. Made of die cast steel for strength and durability, powder coated for lasting beauty, and replaces any existing assist handle.		   Part Number:
9482-000-111 - Assist Handle, White, pkg.

Dimensions:
Mounting Holes: 9-1/16" on center

Chrome Plated Steel Assist Handle
product
Enlarge Photo		   Description:
High quality; works great for exterior or interior entry doors. Can also be used for other applications such as compartment doors, tool boxes, or anywhere a secure, strong handle is needed. Made of die cast steel for strength and durability, chrome plated for lasting beauty, and replaces any existing assist handle.		   Part Number:
9482-000-020 - Assist Handle, pkg.

Dimensions:
Mounting Holes: 9-1/16" on center

Chrome Plated Steel Assist Handle
product
Enlarge Photo		   Description:
High quality; works great for exterior or interior entry doors. Can also be used for other applications such as compartment doors, tool boxes, or anywhere a secure, strong handle is needed. Made of die cast steel for strength and durability, chrome plated for lasting beauty, and replaces any existing assist handle.		   Part Number:
9482-000-023 - Assist Handle, pkg.

Dimensions:
Mounting Holes: 9-1/16" on center

Plastic Entry Door Assist Handle
product
Enlarge Photo		   Description:
Original equipment entry door handle. Made of quality plastic that resists fading, temperature changes, and road acids. Newly designed sure grip and ample hand clearance makes this handle perfect for many uses besides entry doors. Permanent screw hole covers give a professional finished look		   Part Number:
482-A-1-A - Assist Handle, Colonial White, pkg.
482-A-2-A - Assist Handle, Polar White, pkg.
482-A-3-A - Assist Handle, Black, pkg.

Dimensions:
Mounting Holes:
482-A-1-A: 8-7/8: On Center
482-A-2-A & 482-A-3-A:
Center-to-center from 1st hole (closest to inside of handle) = 7-11/16"
Center-to-center from 2nd hole (closest to outside of handle) = 8-3/4"

Deluxe Assist Handle
product
Enlarge Photo		   Description:
Grip area extended for greater security when entering your RV. Padded, rubber grip with molded finger area for comfort and safety. Includes plastic base pads for a professional installation.		   Part Number:
48315 - Deluxe Assist Handle, White, pkg.
48325 - Deluxe Assist Handle, Black, pkg.

Dimensions:
Mounting Holes: 19-21/64" on center and 3-9/16" deep

Ramp Bumper
product
Enlarge Photo		   Description:
Universal replacement ramp bumper is constructed of industrial rubber and molded to accept the bolt or lag screw of your choice along with a washer for added security.		   Part Number:
10715 - Ramp Bumper, pkg.

Dimensions:
2.5" round

Door Bumper
product
Enlarge Photo		   Description:
Commonly found mounted between the screen and entry door. Made of 100% natural rubber compounds for lasting durability and a steel washer molded into the base for a more secure mounting. Includes proper mounting screw.		   Part Number:
11745 - Door Bumper, pkg.

Universal Door Bumper
product
Enlarge Photo		   Description:
HD entry door bumper constructed of industrial rubber for a durable application. Can be installed anywhere bumper protection is needed.		   Part Number:
10695 - Door Bumper, pkg.

Ultimate Door Holder
product
Enlarge Photo		   Description:
Designed for a variety of uses. Made of durable plastic for a long life. Specially designed holding rod uses the T-style idea then improved it by using round ball type end. This gives it a larger radius of fit and flexibility. Holder comes with attachment to keep rod securely in place while in use.		   Part Number:
10465 - 4" Polar White, pkg.
10475 - 6" Polar White, pkg.
10482 -10" Polar White, pkg.

Plastic T-Style Door Holder
product
Enlarge Photo		   Description:
Direct replacement for your original equipment. Constructed of durable plastic for longer life. 		  Part Number:
10414 - 3-1/2" Plastic T-Style Door Holder, Polar White, pkg.
10424 - 3-1/2" Plastic T-Style Door Holder, Colonial White, pkg.
10324 - 3-1/2" Plastic T-Style Door Holder, Black, pkg.
10444 - 6" Plastic T-Style Door Holder, Polar White, pkg.
10454 - 6" Plastic T-Style Door Holder, Colonial White, pkg.
10434 - 6" Plastic T-Style Door Holder, Black, pkg.

Bumper for T-Style Door Holder
product
Enlarge Photo		   Description:
Add this bumper to your door holder and it will prevent your door from hitting your RV.		   Part Number:
10675 - Bumper, Colonial White, pkg.
10685 - Bumper, Polar White, pkg.

90° Angled Plastic T-Style Door Holder
product
Enlarge Photo		   Description:
Works great for applications where the door needs to be held open to avoid items such as awning arms or compartment doors.		   Part Number:
10605 - Angled T-Style Door Holder, Polar White, pkg.
10625 - Angled T-Style Door Holder, Black, pkg.

90° Metal T-Style Door Holder
product
Enlarge Photo		   Description:
Holds door open at a 90° angle from the RV. Often used where a water heater, awning arm, or slide-out may interfere with the door opening completely. Mounted near the hinge of the door and can be used on any type of door. All mounting screws are included. ** Will not replace plastic 90° units exactly - If replacing a plastic 90° holder, it will be necessary to relocate one side of the holder due to the length of the T-stems.		   Part Number:
11775 - 90° Metal T-Style Door Holder, pkg.

90° Stainless Steel T-Style Door Holder
product
Enlarge Photo		   Description:
Guaranteed not to rust! Holds door open at a 90° angle from the RV. Often used where a water heater, awning arm, or slide-out may interfere with the door opening completely. Mounted near the hinge of the door and can be used on any type of door. All mounting screws are included. ** Will not replace plastic 90° units exactly - If replacing a plastic 90° holder, it will be necessary to relocate one side of the holder due to the length of the T-stems.		   Part Number:
11785 - 90° Stainless Steel T-Style Door Holder, pkg.

45° Metal T-Style Door Holder
product
Enlarge Photo		   Description:
Holds door open at a 45° angle from the RV. Often used where a water heater, awning arm, or slide-out may interfere with the door opening completely. Mounted near the hinge of the door and can be used on any type of door. All mounting screws are included.		   Part Number:
11755 - 45° Metal T-Style Door Holder, pkg.

45° Stainless Steel T-Style Door Holder
product
Enlarge Photo		   Description:
Guaranteed not to rust! Holds door open at a 45° angle from the RV. Often used where a water heater, awning arm, or slide-out may interfere with the door opening completely. Mounted near the hinge of the door and can be used on any type of door. All mounting screws are included.		   Part Number:
11765 - 45° Stainless Steel T-Style Door Holder, pkg.

Metal T-Style Door Holder
product
Enlarge Photo		   Description:
Replaces any type of door holder. Constructed of durable steel with zinc plating for longer life that resists rust and corrosion. Includes everything you need to install or replace your existing door holder.		   Part Number:
10495 - 4" Metal T-Style Door Holder, pkg.
10505 - 6" Metal T-Style Door Holder, pkg.

Stainless Steel T-Style Door Holder
product
Enlarge Photo		   Description:
Guaranteed not to rust! Replaces any type of door holder. Includes everything you need to install or replace your existing door holder.		   Part Number:
10515 - 4" S.S. T-Style Door Holder, pkg.
10525 - 6" S.S. T-Style Door Holder, pkg.

Stainless Steel T-Style Door Holder
product
Enlarge Photo		   Description:
Guaranteed not to rust! Replaces any type of door holder. 		  Part Number:
10615 - 4" S.S. T-Style Door Holder, pkg.

Replacement C-Clips
product
Enlarge Photo		   Description:
Original replacement for all C-Clip style door holders. Tired of the plastic breaking, try the metal.		   Part Number:
10394PW - Replacement C-Clip, Polar White, 2/pkg.
10394CW - Replacement C-Clip, Colonial White, 2/pkg
10595 - Replacement C-Clip, Metal, 2/pkg.

C-Clip Style Door Holder - Plastic
product
Enlarge Photo		   Description:
Original replacement for all C-Clip style door holders. Made of sturdy plastic designed for long lasting use. Uses specially formed C-Clip to grip the door holder securely.		   Part Number:
10204 - 3" C-Clip Door Holder, Polar White, pkg.
10214 - 3" C-Clip Door Holder, Colonial White, pkg.
10374 - 5-1/2" C-Clip Door Holder, Polar White, pkg.
10384 - 5-1/2" C-Clip Door Holder, Colonial White, pkg.


C-Clip Style Door Holder - Metal
product
Enlarge Photo		   Description:
Designed with a strong positive catch to keep doors in place. Both pieces are made of sturdy zinc plated steel for years of durable use. Replaces metal and plastic versions. The metal C-Clip socket works with both plastic and metal wells.		   Part Number:
10535 - 3" Metal C-Clip Door Holder, pkg.
10555 - 6" Metal C-Clip Door Holder, pkg.
10575 - 8" Metal C-Clip Door Holder, pkg.

C-Clip Style Door Holder - Metal/Plastic Combo
product
Enlarge Photo		   Description:
One of the more popular versions used by today‘s manufacturers. The well is constructed of zinc plated steel for rust resistance and durability. The plastic C-Clip socket is standard. Replaces the "Kwikee Grip-O" style door holder.		   Part Number:
10545 - 3" C-Clip Style Door Holder w/Plastic Socket, pkg.
10565 - 6" C-Clip Style Door Holder w/Plastic Socket, pkg.
10585 - 8" C-Clip Style Door Holder w/Plastic Socket, pkg.



Low Profile Bumper Door Holder
product
Enlarge Photo		   Description:
Unique door holder made of polymer plastic. Will not rust or fade and provides a secure catch when connected. Since it is a flexible polymer, it also works as a bumper when not in the catch position, which reduces damage to your unit from the door. Used in any application from entry doors to small uses such as compartments.		   Part Number:
10665 - Low Profile Bumper Door Holder, pkg.

Pivoting Door Holder
product
Enlarge Photo		   Description:
Built of durable zinc plated steel for years of use. The polymer plastic receiver can be adjusted to the amount of holding strength needed. The arm is designed to pivot in order to fold it out of the way when not in use. 		  Part Number:
10645 - 3-1/2" Pivoting Door Holder, pkg.
10655 - 5-1/2" Pivoting Door Holder, pkg.
10635 - Replacement Receiver, pkg.

Plunger Door Holder - Straight
product
Enlarge Photo		   Description:
Original replacement plunger style door holder. Constructed of zinc plated steel for long life. Easily installs to any RV or trailer to hold door securely open.		   Part Number:
10284 - 3" Straight Plunger Door Holder, pkg.
10294 - 4-3/4" Straight Plunger Door Holder, pkg.
10404 - Replacement Rubber Socket, pkg.

Plunger Door Holder - Angled
product
Enlarge Photo		   Description:
Original replacement plunger style door holder. Constructed of zinc plated steel for long life. Easily installs to any RV or trailer to hold door securely open.		   Part Number:
10304 - 3" Angled Plunger Door Holder, pkg.
10314 - 4-3/4" Angled Plunger Door Holder, pkg.
10404 - Replacement Rubber Socket, pkg.

Bumper Catch
product
Enlarge Photo		   Description:
Constructed of zinc plated steel for durability and works with any door. Mounts easily to any RV or trailer to hold door securely open.		   Part Number:
10264 - 2-1/2" Bumper Catch, pkg.
10274 - 3-1/2" Bumper Catch, pkg.

Rooster Catch
product
Enlarge Photo		   Description:
Most commonly used as a screen door latch but can also be used to secure doors and cabinets.		   Part Number:
10755 - Rooster Catch, pkg.

Bullet Screen Door Latch
product
Enlarge Photo		   Description:
Universal screen door latch. Used to secure the screen door to the entry door on most RV‘s.		   Part Number:
10785 - Bullet Screen Door Latch, pkg.

Right Hand Screen Door Latch
product
Enlarge Photo		   Description:
Exact replacement for Amerimax style doors and can also be used on other styles as a replacement. The latch location is determined by looking at the closed door from inside your RV. The latch location is the side of the door that it is mounted on. This would mean that a right hand latch will be mounted on the right hand side of the screen door as you view it from inside the RV.		   Part Number:
10765 - Right Hand Screen Door Latch, pkg.

Left Hand Screen Door Latch
product
Enlarge Photo		   Description:
Exact replacement for Amerimax style doors and can also be used on other styles as a replacement. The latch location is determined by looking at the closed door from inside your RV. The latch location is the side of the door that it is mounted on. This would mean that a left hand latch will be mounted on the left hand side of the screen door as you view it from inside the RV.		   Part Number:
10775 - Left Hand Screen Door Latch, pkg.

Coleman Screen Door Latch
product
Enlarge Photo		   Description:
Exact replacement for Coleman style entry doors and can also replace many entry doors found on fold-down campers.		   Part Number:
10795 - Screen Door Latch, pkg.

Camper Door Latch
product
Enlarge Photo		   Description:
Universal entry door latch is commonly used on fold-down campers. Constructed of die cast steel and is painted a light gray for a universal application. 		  Part Number:
10805 - Camper Door Latch, pkg.

Fold Down Camper Latch & Catch
product
Enlarge Photo		   Description:
Used to secure the lid of your fold down camper for travel. Made of durable steel and are either zinc plated or powder coated in a white finish.		   Part Number:
10825 - Latch & Catch, Zinc, pkg.
10845 - Latch & Catch, White, pkg.
10835 - Catch Only, Zinc, 2/pkg.
10855 - Catch Only, White, 2/pkg.

Chrome Hood Latch
product
Enlarge Photo		   Description:
Used in any application where a cover needs to be secured for travel. This unit is often found on the interior of Class C RV‘s.		   Part Number:
10865 - Chrome Hood Latch, pkg.

Rubber Hood Latch
product
Enlarge Photo		   Description:
Constructed of zinc plated steel and industrial rubber. Often used for an interior engine cover latch on Class C RV‘s and LP bottle covers on many travel trailers.		   Part Number:
10875 - Rubber Hood Latch, pkg.

Lockable Draw Pull Latch
product
Enlarge Photo		   Description:
Used on multiple applications including cargo and light entry doors, engine covers or wherever a light security latch is needed. Made of nickel plated steel; includes mounting screws.		   Part Number:
11735 - Lockable Draw Pull Latch, pkg.

Locking T-Handle
product
Enlarge Photo		   Description:
Exact replacement for many truck caps, bed covers, and toolboxes. Built of sturdy die cast steel and has an automotive style lock tumbler for lasting use.		   Part Number:
10885 - Locking T-Handle, Chrome, pkg.
10985 - Locking T-Handle, Black, pkg.

Locking L-Handle
product
Enlarge Photo		   Description:
Exact replacement for many truck caps, bed covers, and toolboxes. Built of sturdy die cast steel and has an automotive style lock tumbler for lasting use.		   Part Number:
10895 - Locking L-Handle, Chrome, pkg.
10995 - Locking L-Handle, Black, pkg.

Inside L-Handle
product
Enlarge Photo		   Description:
Used on the interior of our popular ‘T‘ and ‘ L‘ locking handles. Provides the ability to open the doors from inside the truck cap or compartment. Fits most square-shaft operating handles.		   Part Number:
10905 - Inside L-Handle, pkg.

Cams
product
Enlarge Photo		   Description:
Universal application; used in conjunction with our ‘T‘ and ‘L‘ locking handles.		   Part Number:
10925 - 2" Cam, pkg.
10915 - 2-3/4" Cam, pkg.

Universal Door Bumper
product
Enlarge Photo		   Description:
Prevents your door or door holder from contacting the exterior of the RV. Constructed of durable polypropylene.		   Part Number:
10705 - Door Bumper, White, pkg.

Dimensions:
2-3/4" x 3/4"